EDA, PLM, PTC oh my: Q3 earnings updates across PLM
Most of the big PLMish earnings for this cycle are out. Cadence reported its Q3 on October 26, Dassault Systèmes on October 28, PTC its fiscal Q4 on November 4, and Siemens reported its fiscal Q4 on November 12. Synopsys reported back on August 26 for the quarter that ended July 31 — and I didn’t cover it then, but with EDA and Ansys in the mix, it’s worth including here. Onwards.
The short version: chip design is still booming. Mechanical CAD/PLM is growing, but at a much calmer pace. And the gap between the two keeps getting wider.
| Company | For the Q ended | Revenue | YoY growth | Recurring / ARR metric |
| Cadence | Sep 30 | $1.633B | up 22% | Recurring revenue up 18%; record backlog $8.2B |
| Synopsys | Jul 31 | $2.477B | up 42% (including a full quarter of Ansys) | Backlog $10.9B; time-based license revenue up 12% |
| Dassault Systèmes | Sep 30 | €1.552B | up 5% cc | ARR €4.50B, up 6% cc; recurring is 84% of software |
| PTC | Sep 30 | $673M | down 25% ( down 24% cc) | ARR excluding Kepware & Thingworx $2.508B, up 8% (up 10% cc) |
| Siemens DI software | Sep 30 (Q4 FY26) | €2.144B (FY26: €7.2B) | up 13% (up 12% comp.) | ARR €6.1B, up 12% comp.; SW backlog €7.3B |
cc = constant currency. Revenue growth is as reported unless noted.
Cadence: everything up double digits
Revenue was up 22% in Q3 to $1.63 billion, and every product group grew by double digits: Core EDA up 20% (69% of revenue), semiconductor IP up 24% and System Design & Analysis up 30%. SD&A got help from Hexagon’s Design & Engineering business, which Cadence bought in February. Hardware (Palladium/Protium) had another record quarter. Cadence raised its full-year outlook for the third time, to about 21% growth ($6.387–6.417 billion). Recurring revenue grew 18%. That’s slower than total revenue because upfront hardware and IP deliveries made up a bigger share of the quarter.
According to the earnings call, this growth is being driven by hyperscalers and memory makers. A “top telco” made Cadence its primary design partner, Nokia and Renesas were named as AI-agent adopters, and Cadence logged 16 new digital full-flow wins. China was 16% of revenue.
Synopsys: Ansys and EDA do the work
Total revenue in the quarter rose 42% to $2.5 billion, including $711 million from a full quarter of Ansys. The year-ago quarter included only a few weeks of Ansys, so the growth rate isn’t actually an apples-to-apples comparison. EDA software revenue grew about 8.5%, and management expects double digits for Q4 and the full year. Design IP ($474 million, up 11%) is growing again after a rough FY25, when U.S. export restrictions disrupted sales in China and a big foundry customer stumbled. By revenue type, time-based license revenue was $1 billion (up 12%) and upfront product revenue was $665 million (up 29%). Maintenance and service jumped to $809 million, mostly because of the Ansys contribution. Backlog was $10.9 billion.
The biggest Ansys deal was GPU-accelerated CFD for a company-wide digital twin at a multinational electronics component maker. Synopsys also cited faster motor design at a heavy-equipment maker and near-real-time crash analysis with SimAI at an automaker.
FY26 guidance is $9.69 billion to 9.74 billion, including about $2.98 billion from Ansys. This all assumes no further changes to export controls. (And again, this is from August, so not as recent as the others.)
Dassault Systèmes: steady, with a mix surprise
Revenue was €1.552 billion, up 5% in constant currency, and ARR rose 6% to €4.50 billion.
But these numbers hid a surprise: licenses and other software grew 14% to €219 million, while subscription and support grew just 3%. Product mix and buyer preference drove the difference. Recurring revenue fell to 84% of software revenue. 3DEXPERIENCE software rose 25% and cloud 14%.
By brand, Industrial Innovation (CATIA, ENOVIA, etc.) revenue rose 5% to €753 million. Mainstream Innovation (SOLIDWORKS, CENTRIC, etc.) rose 8% to €375 million. Life Sciences grew just 1%, though DS says Medidata should return to growth in Q4.
By geography, the Americas (39% of software revenue) fell 3% against a tough comparison, Europe (38%) grew 9%, and Asia (23%) grew 12%, with double-digit growth in China and strength in aerospace and high tech.
The ArisGlobal acquisition closed in September, and DS raised its FY26 revenue guidance to €6.399–6.459 billion (up 4–5% cc). We’ll learn a lot more at its Capital Markets Day on November 17.
PTC: just numbers, no narrative
As we all know, PTC agreed to be acquired by Schneider Electric on October 5, so PTC didn’t hold an investor call, didn’t give guidance, and published only a bare-bones press release. ARR, excluding the divested Kepware and ThingWorx businesses, was $2.508 billion, up 8% (up 10% cc). By my math, constant-currency ARR went from $2.5 billion in Q3 to $2.545 billion. That works out to roughly $97 million of net new ARR, above the $79–92 million PTC had guided to back in July — but that’s my math, not PTC’s. They didn’t say.
Revenue fell 25% to $673 million, which looks alarming but probably isn’t. License revenue (the upfront piece of term subscriptions recognized under ASC accounting rule 606) dropped from $484 million to $267 million, while support and cloud held at $382 million. That’s mostly timing: under ASC 606, the license portion of a term subscription is recognized up front (when the contract starts or renews), so revenue swings with the timing of big renewals. For the full year, recurring revenue was 96% of the $2.733 billion total, and perpetual licenses were just $17 million.
It’s a bummer that we don’t have greater insight, but we should expect more of the same until the deal closes, expected by Q3 2027.
Siemens Digital Industries: record software orders, EDA and PLM deliver
DI’s software business reported revenue of €2.14 billion in fiscal Q4 (July–September), up 13% (12% on a comparable basis).
For the fiscal year, DI software revenue was €7.2 billion (up 13% on a comparable basis), and ARR was €6.1 billion (up 12%).
Siemens AG CFO Veronika Bienert said several large PLM and EDA contracts drove record software orders of €2.9 billion, along with early renewals that included “significant upselling.” CEO Roland Busch says about 5% of DI software revenue already comes from AI or industrial AI.
Siemens says Altair met its FY26 revenue targets — w00t w00t.
Major Q4 wins were in semiconductors, electronics and aerospace & defense, and software growth came mainly from the Americas and Asia/Australia. (Siemens’ regional breakdowns for China, Germany and the U.S. cover only the automation side.) Across all of DI, end markets split roughly 15% each: automotive, machine building, and electronics & semis; 10% each pharma/chemicals and food & beverage; and 5% A&D.
EDA and simulation led FQ4 revenue growth, so it’s no surprise that Siemens is seeking to grow its offerings there. As I wrote about earlier this week, Siemens agreed to buy Lauterbach (embedded-software debugging and tracing) to round out its semiconductor design and verification portfolio.
For FY27, Siemens expects double-digit software growth within DI’s 8–12% outlook. One thing to note: Siemens said FY27 is a big EDA renewal year, with most of the sales funnel in Q4, so Q1 (the current quarter) software growth should be only “moderate.”
TL;DR. What does it all mean??
Subscription vs. perpetual. This feels like it will never end. All five vendors are now mostly recurring, but the details differ. PTC is essentially all subscription, yet ASC 606 accounting still makes its revenue lumpy, so ARR is the number to watch. DS still has a decent-sized perpetual base, and this quarter licenses outgrew subscriptions, which complicates its subscription story. The EDA vendors run on time-based licenses, but hardware and IP deliveries swing their quarters. Ansys adds a maintenance-heavy layer at Synopsys. Siemens says DI software has finished its SaaS transition but shares EDA’s renewal lumpiness. Like Cadence and Synopsys, its big multi-year EDA renewals make some quarters and years much bigger than others.
End industry. The lumpiness continues here, too. Spending on AI silicon fuels Cadence’s and Synopsys’ growth. DS sees strength in aerospace and high tech, while automotive in Europe was the soft spot earlier this year. Siemens straddles both worlds, with large PLM and EDA wins in semis, electronics and A&D in the same quarter.
Company size and project scale. This continues to really matter. The biggest deals are truly enormous: hyperscalers and telcos picking a primary EDA partner, enterprise 3DEXPERIENCE rollouts, and PTC’s multi-year contracts, which ramp in later years (PTC management said its deferred ARR for FY27 roughly doubled). At the other end, DS’s Mainstream Innovation (up 8%) outgrew Industrial Innovation (up 5%), which suggests small and mid-sized manufacturers are still spending. Siemens sells both to giant semis and A&D primes and to machine builders. I don’t have facts to back this up, but it feels like big deals are getting even bigger.
It’s the economy, dummy
The ISM Manufacturing PMI rose to 55.5 in October from 54.5 in September, its 10th straight month of expansion, with new orders and production both up (production hit its highest level since November 2021). Factories that are busy and getting busier are what PLM, CAD and CAE vendors need for seat and subscription growth. But ISM also reported comments that skewed negative, citing pricing volatility, lead times, tariffs, and the Iran war.
My read: buyers are paying for commitments made in the past —like the huge deferred ARRs and record backlog— rather than opening new budget for expansion. I’m looking forward to the big deal announcements that typically come in the Q4 reports, which will be in January or February. But we’re not done yet in this cycle: Autodesk reports its FQ3 on November 24.
As always, check each company’s investor relations website for far more detail that I can cover here.
Discover more from Schnitger Corporation
Subscribe to get the latest posts sent to your email.

